We’re here to keep your power on, 24/7/365
Authorized factory trained certified technicians. Servicing generators up to 2MW generator.
Scheduled Maintenance Performed by Your Generac Industrial Factory Authorized Team
- Annual
- Semi-Annual
- Quarterly
- NFPA 110 Life Safety
The Right Choice
Our team consists of professionals who have proven reliable, both in terms of manufacturing training and industry experience. We are a trusted company readily available 24/7/365.
Scheduled Maintenance Plans
- Annual
- (1) Full-Service Check
- Semi-Annual
- (1) Full-Service Check
- (1) Inspection Check
- Quarterly
- (1) Full-Service Check
- (3) Inspection Checks
- NFPA 110 PER JURISDICTIONAL CODE
Standard Generator
Scheduled Maintenance
Scope of Service Checks
Full-Service Check
- Replace engine lubricating oil and dispose of it environmentally responsibly.
- Replace oil filter(s) in natural gas engines.
- Replace oil and fuel filters in diesel engines and coolant filter if required.
- Inspect air filter(s) and crankcase breathers. Replace (additional cost) with client’s approval.
- Inspect the cooling system for leaks and conditions.
- Inspect and adjust belts as required.
- Natural gas/LPG fueled engines inspect spark plug wires and ignition system for damages and excessive wear.
- Inspect the generator fuel system for leaks or damage.
- Inspect wiring and connectors.
- Inspect battery(s) condition (load test) electrolyte levels, check for corrosion and battery charger function.
- Run the engine and check temperatures and pressures.
- Test the governor for proper operation and stability and inspect linkage.
- Test the engine safety shutdown systems.
- Test system for proper frequency/speed, voltage, and amperage.
- Inspect the transfer switch and perform the transfer with the client’s approval.
- Submit a written report to the client and advise of any further work required.
Inspection Check
- Inspect engine lubricating oil and coolant for proper levels and condition.
- Inspect air filter(s) and crankcase breathers. Replace (additional cost) with the client’s approval.
- Inspect the cooling system for leaks and conditions.
- Inspect and adjust belts as required.
- Natural gas/LPG fueled engines inspect spark plug wires and ignition system for damages and excessive wear.
- Inspect the generator fuel system for leaks or damage.
- Inspect wiring and connectors.
- Inspect battery(s) condition (load test) electrolyte levels, check for corrosion and battery charger function.
- Run the engine and check temperatures and pressures.
- Test the governor for proper operation and stability and inspect linkage.
- Test the engine safety shutdown systems.
- Test the system for proper frequency/speed, voltage and amperage.
- Inspect the transfer switch and perform the transfer with the client’s approval.
- Submit a written report and advise the client of any further work required.
Houston, TX
Largest Water Plant in the USA
Need: Emergency Standby Generator to back up utility on large surface water pumps.
Solution: A Generac 1500kw Diesel Generator with Level II Sound Enclosure. Generators of Houston sold the unit and assembled the Level II sound ‘Wings’ on site. We performed Factory Startup with 4 hour load bank and a 4-hour Customer Orientation of the System.